Jardin Square Gazebo

• The roof system has been specially designed with a 25 degree pitch (boasting a 111" peak height). This allows for a 4 season set up preventing an extreme accumulation of snow on the roof. An interior heat source (such as a hot tub) could make snow on the roof stick to the vinyl so we would always recommend common sense when dealing with snow.

• The vinyl top has a patented system of air circulation vents while being 100% waterproof.

• The combination of roof overhang, roof tensioning system and roof pitch means that water puddles are virtually eliminated.

• The kit includes complete brackets and moldings to secure your unit to the deck or patio.

• Each screen panel is 44" wide and 79" high for easy walk through

• The support bar on the inside of the screen panels is 1/3 from the bottom on all panels. This means that you have a clear line of sight when seated.

• 44" sliding door with a specialized top roller system allows for a strong, easy sliding door.

Frame is 1-1/8" wide x 3/4" extruded aluminum with baked on enamel finish - in white or black. The frame is an extruded aluminum construction. The aluminum is 1/8" thick and the frame measures 1-1/8" x 3/4"

Pictured on the right are the 2/3 size Mylar window panels. For the purpose of the picture they are on their 'side.' Note they are hinged in the middle. The picture shows the clear and the smoked Mylar.

The bottom 1/3 size panel can be either the Mylar or any color vinyl - just like the roof top.

The PVC rails that hold the screen walls to your deck or patio. Take note of the pressure pins that hold the privacy panels in the screen frame - flush with the inside face.

Built into the end of each galvanized steel roof rafter within the 5 1/2" overhang. The "nut & bolt" type operation allows for a simple finger operation and does not require a wrench or pliers to operate.

Additionally, the extruded aluminum bolt down brackets hold the front header rail on securely along the full length of the unit.

Both the roof and the gable sides of the roof are securely fastened to the side header rail by way of a grommet and lace up system. Easy to remove and easy to re-do!

The room MUST be screwed to a deck or patio. PVC rails are supplied to secure the extruded aluminum frame to the deck or patio. The aluminum extrusion is secured in place with self tapping metal screws. The PVC rail is then secured down to the deck or patio in a traditional manner.

The Patio Plus rooms us top mounted rollers. This design allows for large smoothly operating nylon rollers in a die cast setting held inside a PVC rail. Long lasting quality in a smooth sliding door system